Glider Series Checklist

Name
Belts, Straps & Vests
These are body support surface areas exposed to bodily fluids. Any component with a fabric surface or Velcro can collect debris and become unsanitary and must be replaced.
Fabric
Altimate Medical uses some upholstered fabric on its support surfaces. Altimate Medical recommends that upon re-issue all upholstered contact surfaces must be replaced due to the high probability of exposure to bodily fluids from the previous users.
Inspect and replace as necessary.
Molded Pads & Rubber Grips
Altimate Medical uses foam molded support pads for some support surfaces. These pads are a sealed impermeable easily cleanable surface. If the pads become worn or cracked, they may harbor bacteria. Before re-issue inspect each molded support pad and rubber grip and replace as necessary.
Inspect and replace as necessary.
Casters and Wheels
Examine the caster and wheel attachment points. Ensure that bolts, nuts, washers, and caps are securely tightened. Make sure the stem is fully threaded in place. Swivel and wheel rotation should move freely without binding or excessive play. Test the locks, ensure they engage, and release as intended.
Lifting Actuators
Hydraulic Actuators Replace an actuator if it is leaking fluid, or not holding its standing position.
Pump Handle If the nuts and bolts connecting the pump handle to the actuator become loose, the holes in the actuator handle may elongate. If this occurs, it’s essential to replace the pump handle.
Pump Handle Orientation Pump handles are side dependent (left or right). Do not mount a pump handle on the wrong side, this will put it out of reach for the user. Multi-Adjustable handles may be mounted on either side.
Inspect and replace as necessary.
Pow'r Up – Electric Lift Actuator Systems
Inspect all the wires, harnesses plug points for damage, kinks, or exposed wiring. Altimate Medical recommends replacing the battery every 4 years. Replace any components that appear damaged. Test the emergency release system, by pulling the pin and lifting the trigger handle. Be sure to replace the pin.
Inspect and replace as necessary.
Corrosion
Visually examine welds of the base frame and major components for cracks, or porous surfaces that could compromise their integrity.
Inspect and replace as necessary

Clamping Components / Adjustable Moving Parts

The Glider product range uses a variety of locks and clamps to regulate the position of supports. Lock and clamp components are made of either metal or plastic. Inspect the following components to ensure they have full range of movement and hold, and release as expected.
Inspect and replace as necessary.
Foot Supports
Knee Supports
Seat Depth Adjustment
Hip Supports
Lateral Supports
Head Support
Tray
Back Angle Adjustment (wheel / knob)
Resistance Cylinders
Labels
Labeling is important for safe and effective use of the EasyStand Glider, ensuring that all labels are intact and legible.
Electric System Labels
Enter Here any notes about refurbishing the product.